WAV™ :: EXTREME FLOW FOR YOUR AQUARIUM
A POWERHEAD THAT ANSWERS ALL YOUR NEEDS
Extreme flow (~4000+ gph)
Compact size (less total mass compared to nearly all similar flow pumps)
Directional flow (pivots with 40 degree range of motion and can be rotated – great for rear wall use)
Safe, 24V DC operation
Low power consumption – Less than 35w at the wall
Multiple operational modes (random flow modes, mirror, inverse, etc.)
Easy to clean (pump automatically shuts off when removed from water)
Incredibly Quiet (possibly the quietest driver on the market)
Magnetic mount works on up to 1″ glass (in a class by itself)
Easy installation with just a single skinny wire for all power and control (1LINK interface makes it a snap!)
Competitively priced (In USA just $199.95 for one WAV, $499.95 for the WAV Starter Kit)
DIRECTIONAL FLOW ALLOWS STEALTH MOUNTING OPTIONS
Unfortunately, some of the leading water moving pumps on the market only send flow in a direction perpendicular to the glass. This really limits an aquarists options and, in some cases, obstructs the view. Having a powerhead that can be pointed in all directions is nothing new, but the hardware to make that happen usually takes up too much space and is unsightly. The WAV answers both of these problems with a new take on an articulating mount.
ENDLESS FLOW OPTIONS FOR EVERY AQUARIST
We know that everyone likes their flow a little bit different. So Apex Fusion controls the WAV with a multitude of patterned flow and random settings. You can even set one or more pumps to mirror or be the inverse of another.
DETAILED, REAL-TIME PUMP STATUS AND AI
This is a first for this product segment. From within Apex Fusion, the details of operation of every WAV on your tank can be observed. You will be able to see the mode, the RPM, the temperature range, and the current status of the pump.
SNAILS, FALLS, STALLS – NO WORRIES!
Snails and other obstructions are usually a powerhead’s worst enemy – tearing it to pieces. Sometimes just knocking a pump off the glass will not only kick up sand all over the tank, but it can also destroy the pump, or worse your favorite corals.
SAY GOODBYE TO CABLE MESS
Wires and cables are the enemy. Even so-called “wireless” devices on our aquariums have far too many cables and power supplies that clutter up our tank stands. The 1LINK system overhauls that mess of cabling by providing a way to connect up to five devices onto one power supply and make them controllable with your Apex.
There are three 1LINK source connections that can provide power and communication to WAV pumps, a DŌS, or future 1LINK devices. Additionally there are two 24V DC switched connections for future add-ons or DIY Solutions.
Do you want wireless, or less wires?
1LINK™ – EASY, ONE-CLICK INSTALLATION
The WAV is the first of a line of aquarium products from Neptune Systems that will use a completely new interface. While many in the aquarium world continue to embrace wireless technologies for interconnectivity, we have decided to go the other direction – a wire.
Wireless connectivity from your smartphone or tablet to your Apex (or other controller) is completely logical – and we embrace that. However, wireless used for the interconnecting of devices within the confines of common aquariums (that are mostly less than 6′ long) is not only unnecessary, but it reduces reliability. Our philosophy is that when distances are measured in a few feet, wireless is a solution looking for a problem. And ironically, wireless really does not save wires. You still need to use a wire to get power to the devices anyway. And let’s not forget configuration – wireless devices require syncing, endless button presses and arcane steps to get them to connect up – hopefully with you and not your neighbor. Finally for all this “benefit”, you as the consumer get the added cost of this wireless technology that must be baked into the price of every device you buy.
SIZE MATTERS WHEN IT COMES TO PUMP WIRE
When it comes to any powerhead pump, the smaller the wire, the better – the easier it is to hide. This is true both inside as well as outside the aquarium. Some pumps put the wire and motor on the outside of the aquarium and claim that this has a better aesthetic – but there still is a wire. Many other manufacturers’ cables have a much larger diameter, some nearly 3x the mass.
Some of today’s most popular water moving pumps are anything but quiet. In fact, the ramping and pulsing sounds can even resonate into solid floors and be heard in other rooms. We have tested many pumps in our lab and the WAV has one of the quietest driver systems on the market today.
WHAT IS YOUR AQUARIUM’S FLO™ ?
The key to keeping a great aquarium is understanding what is going on inside, observing when things go well or badly, and then trying to understand the relationship between what you did, what you measured, and what happened.
A NEW MEASUREMENT STANDARD
This understanding is here with the WAV and Apex Fusion. Since the WAV constantly communicates with Apex Fusion, it knows exactly how much flow it is producing and logs a new measurement standard we simply call FLO.
WAV Starter Kit
Includes Two (2) WAVs, 1LINK Module, 100W 24VDC Power Supply, 3′ Aquabus Cable
Apex, Apex Lite, or Apex Jr.
Includes 2 WAV Pump
1LINK Module with open port
Apex, Apex Lite, or Apex Jr.
Apex with open 1LINK port on EnergyBar 832